README.md

## CodeSonar 5.4p0

This is a default image that provides the CodeSonar Hub service. Data volumes can 
be mounted such that data persists. A license from GrammaTech is required to be
able to use the hub and provide scans. Contact sales@grammatech.com for access
to a license.

## Build the Image
Build the image using the standard
  `docker build -t codesonar-hub .`

## Running the Container
Suggested use is to run the container using:

`docker volume create hub

docker network create --driver bridge net 

docker run -d --name hub -p 8080:7340 -v hub:/home/codesonar/hub --network net codesonar-hub`

This will put all data in the hub volume and route localhost:8080 to the hub and 
connect the container to network net such that scanners can connect to it.

The hub will have default password for the `Administrator account` set to 
`HubSecretPasswd` at creation-time, which can be changed by 
`--build-arg HUB_DEFAULT_PWD=YourOwnSecretPWD` during the container build step.
Please change the default password after initial hub creation. This is also the
time to install the run-time license.

## Shutdown
Recommended to shutdown the container through
`http://[host]:[port]/command/shutdown` before terminating the container

## Resources
CPU Min/Recommended 2/8+<br>
RAM Min/Recommended/Max 2G/8G/Unlimited

## Ports
Application is using port 7340