UNCLASSIFIED - NO CUI

Skip to content

Release 2.41.0

Release Engineering

Expectations for Release Engineer

  • A regularly scheduled release takes place Tuesday-Friday every other week at the end of a sprint.
  • Do not sign up for release engineer if you have any planned time off during Tues-Fri during the release week.
  • Testing on the Dogfood cluster should be complete by end of day Wednesday.
  • The release should be mostly complete by end of day Thursday. (No one wants to be troubleshooting release things on a Friday at 5 pm)
  • join the Il4 Mattermost Big Bang Release Engineering Channel. This group chat will allow the Maintainers 1 to support you. This group also provides the Maintainers 1 with visibility on where we are in the release process.
  • The RE should seek anchor’s approval prior to starting step 1. Maintainers tend to push through last minute MRs on Tuesday morning. We want to get any finished work into the release wherever possible.
  • If a shadow is assigned, hop in a Zoom breakout room and pair to complete the release process.

Shadowing

  • Team members should shadow a release engineer prior to becoming RE. Assigned REs should have a solid understanding of the release process prior to their turn and have shadowed enough to understand and be able to execute the release process.
  • Try to clarify any questions about the release process steps prior to becoming the actual release engineer.
  • Review the release process steps before it's your turn. As always you can reach out to the Maintainers 1 with questions about the release process.
  • Sync regularly with the release engineer to understand any issues/blockers that they run into. Likely you'll run into similar issues or blockers.

Prerequisites

Important: Make sure that you have met all prerequisites before the day you're scheduled to start working on a release in case you run into any problems.

Release Process

Forward

  • DO NOT blindly copy and paste commands prepended with $. Carefully read and evaluate these commands and execute them if applicable.
  • This upgrade process is applicable only to minor Big Bang version upgrades of Big Bang major version 2. It is subject to change in future major versions. Patch version upgrades follow a different process.
  • Use the Gogru release automation tool along with R2D2 to complete the release. Currently Gogru only supports the 1. Release Prep part of the release process. Follow the README for instructions on how to clone and install Gogru.
  • Use the R2D2 release automation tool to automate certain parts of this release process. Follow the README for instructions on how to clone and install R2D2. Usage of R2D2 is denoted in the document by the _R2-D2_ prefix.
  • The release branch format is as follows: release-<major>.<minor>.x where <minor> is the minor release number. Example: release-2.7.x. The <minor> string is a placeholder for the minor release number in this document.
  • The release tag format for major version 2 of Big Bang is: 2.<minor>.0.

NOTE: As you work through the release make a list of pain points / unclear steps. Once the release is complete, provide this feedback to the maintainers via MM and/or an MR to update the documentation. This allows us to continuously improve this process for future release engineers.

1. Release Prep

📌 NOTE: If you need the manual steps and/or R2D2 steps, expand them at the end of this section.

  • Create the Bigbang (product) Issue
    ./gogru createIssue

  • Verify the Dogfood cluster is up and running normally
    ./gogru dogfoodCheck

    • If there are any issues with the Helm Releases or Pods in the output, investigate and fix them before continuing

  • Create the release branches for Dogfood and BigBang (product), and verify the hash of the release branch matches the master branch
    ./gogru createRB

  • Update BigBang (product) version references with the new release version
    ./gogru update-version-references

R2D2 and Manual Steps (skip if using gogru commands)

  • Check the Big Bang Issues to see if a release issue has already been created. If none exists create one with the following values

    Field Value
    Name Release 2.<minor>.<patch>
    Description copy/paste the Release Process section of this document
    Assignee $YOUR_NAME
    Labels kind::chore priority::2 status::doing team::Tools & Automation
    Weight 5
    Iteration $CURRENT_ITERATION

  • Verify the dogfood cluster is up and running normally.

    • Connect to the dogfood cluster

      # Modify ~/.ssh/id_rsa to the path for your SSH key
sshuttle --dns -vr ec2-user@$(aws ec2 describe-instances --filters Name=tag:Name,Values=dogfood2-bastion --output json | jq -r '.Reservations[0].Instances[0].PublicIpAddress') 192.168.28.0/24 --ssh-cmd 'ssh -i ~/.ssh/id_rsa'

    • Run kubectl get hr -A and verify all helm releases show Ready True

      • If helm releases not showing Ready True investigate and fix the issues before continuing with the release.

  • Make sure you have both Big Bang (product) and Big Bang (dogfood) checked out and updated

  • Create release branch in Big Bang (product). This is done after the mid sprint check-in on Tuesday to ensure all required MRs for the release have been merged into Big Bang. You will need to request permissions from the maintainers 1 if you run into permissions issues. NOTE: the R2D2 tool will not show you an error if you do not have permission

    • R2-D2: Run r2d2 in your shell inside the Big Bang (product) repository and select the Create release branch option
    Manual Steps

    • In either the Gitlab UI or the Git CLI, create a new branch from master with the name release-2.<minor>.x.

      # CLI example, replace `<release-branch>` with the name of the release branch as specified above
$ cd bigbang
$ git checkout master
$ git pull
$ git checkout -b <release-branch>
$ git branch --show-current
$ git push -u origin <release-branch>

  • Check last release SHAs

    • Verify that the previous release branch commit hash matches the last release tag hash. Investigate with previous release engineer if they do not match.

    • R2-D2: Check last release SHAs

      Manual Steps
      • Go to Branches in Big Bang (product).
      • Find the latest release branch. It should be in the format release-<major_version>.<minor_version>.x (e.g. release-2.7.x). You will see an eight-character commit hash below it (e.g. 6c746edd)
      • Go to Tags in a separate tab. Here you will see the latest release tag listed first. Verify that this tag has the same hash you found in the previous step.

  • Create release branch in Big Bang (dogfood).

    # CLI example, replace `<release-branch>` with the name of the release branch as specified above
$ cd dogfood-bigbang
$ git checkout master
$ git pull
$ git checkout -b <release-branch>

  • Upgrade Big Bang (product) version references

    • R2-D2: Upgrade Version references

      Manual Steps

      💡 Tip Make the following changes in a single commit so that they can be cherry picked into master later. All changes should be made in the Big Bang (product) repository

      • In base/gitrepository.yaml, update ref.tag to your current release version.

      • Update chart release version chart/Chart.yaml

      • Add a new changelog entry for the release, ex:

        ## [2.<minor>.0]

- [!2.<minor>.0](https://repo1.dso.mil/big-bang/bigbang/-/merge_requests?scope=all&utf8=%E2%9C%93&state=merged&milestone_title=2.<minor>.0); List of merge requests in this release.

<!-- Note: milestone_title=2.<minor>.0 version must match the given minor release version -->

      • Update /docs/understanding-bigbang/configuration/base-config.md using helm-docs.

        # example release 2.<minor>.x
$ cd bigbang
$ git checkout release-2.<minor>.x
$ docker run -v "$(pwd):/helm-docs" -u $(id -u) jnorwood/helm-docs:v1.5.0 -s file -t .gitlab/base_config.md.gotmpl --dry-run > ./docs/understanding-bigbang/configuration/base-config.md

    • Update docs/packages.md on your release branch on Big bang : Add any new Packages. Review if any columns need updates (mTLS STRICT is a common change, follow the other examples where STRICT is noted). Also make sure to update and remove the BETA badge from any packages that have moved out of BETA.

    • Commit changes git commit -am 'version updates for release <release-branch-name>'

    • Push changes (git push)

  • Reach out to Maintainers 1 to review your commits to the release branch.

2. Upgrade and Debug Cluster

⚠️ WARNING: Upgrade only, do not delete and redeploy.

  • Check and Renew ElasticSearch (ECK) License
    ./gogru eck-license-check

  • Check and Renew Mattermost License
    ./gogru mm-license-check

  • Upgrade Flux
    ./gogru update-flux

  • Upgrade Dogfood
    ./gogru upgrade-dogfood

After running the upgrade-dogfood command, an MR will be opened in your name. Have the Maintainers 1 merge your branch into master. Once merged, flux should pick up the changes and begin reconcile the helm releases. This may take up to an hour depending on the size of the release.

As an extra check, you can watch the Release helmreleases, gitrepositories, pods, and kustomizations to check when all HRs have properly reconciled. Gogru's dogfoodCheck only looks at the HR's and Pods for now.
watch kubectl get gitrepositories,kustomizations,hr,po -A

📌 NOTE: Manual Steps in the event that Flux does not reconcile for 10 minutes

If flux has not updated after ten minutes: 
flux reconcile hr -n bigbang bigbang --with-source --force
  • If flux is still not updating, delete the flux source controller:
kubectl delete pod -n flux-system -l app=source-controller
  • If the helm release shows max retries exhausted, check a describe of the HR. If it shows "another operation (install/upgrade/rollback) is in progress", this is an issue caused by too many Flux reconciles happening at once and typically the Helm controller crashing. You will need to delete helm release secrets and reconcile in flux as follows. Note that ${HR_NAME} is the same HR you described which is in a bad state (typically a specific package and NOT bigbang itself).
# example w/ kiali
$ HR_NAME=kiali
$ kubectl get secrets -n bigbang | grep ${HR_NAME}
# example output:
# some hr names are duplicated w/ a dash in the middle, some are not
sh.helm.release.v1.kiali-kiali.v1                                       helm.sh/release.v1                    1      18h
sh.helm.release.v1.kiali-kiali.v2                                       helm.sh/release.v1                    1      17h
sh.helm.release.v1.kiali-kiali.v3                                       helm.sh/release.v1                    1      17m
# Delete the latest one:
$ kubectl delete secret -n bigbang sh.helm.release.v1.${HR_NAME}-${HR_NAME}.v3

# suspend/resume the hr
$ flux suspend hr -n bigbang ${HR_NAME}
$ flux resume hr -n bigbang ${HR_NAME}
  • If you see errors about no space left when you kubectl describe a failed deployment. The logs have probably filled the filesystem of the node. Determine which node the deployment was scheduled on and ssh to it and delete the logs. You need to have sshuttle running in order to reach the IP of the nodes.
ssh -i ~/.ssh/dogfood.pem ec2-user@xx.x.x.xx
sudo -i
rm -rf /var/log/containers/*
rm -rf /var/log/pods/*

Then the deployment should recover on its own

Verify cluster has updated to the new release

  • Run ./gogru dogfoodCheck and verify that there are no outstanding issues with Pods or Helm Releases
Old R2D2 Steps (skip if using gogru commands)

  • Connect to the dogfood cluster

    # Modify ~/.ssh/id_rsa to the path for your SSH key
sshuttle --dns -vr ec2-user@$(aws ec2 describe-instances --filters Name=tag:Name,Values=dogfood2-bastion --output json | jq -r '.Reservations[0].Instances[0].PublicIpAddress') 192.168.28.0/24 --ssh-cmd 'ssh -i ~/.ssh/id_rsa'

    📌 NOTE: If you have issues with the AWS CLI commands, adding via the AWS web console is another option. Reach out to maintainers 1 for assistance.

Default Application Credentials

  • Review Elasticsearch health and trial license status:

    • The url to do this is https://kibana.dogfood.bigbang.mil/login?next=%2F. Log on with the information for Logging (Kibana)

      • BUG: Could not find in UI. Per the docs. Click Hamburger Menu > Stack Management > License Management
      • Work around: Validate via the API. Click Hamburger Menu > Dev Tools and enter GET _license into the console, then click ► send request, if results show expiry date then license is still valid.

    • Run a 'kubectl get pods -A' and confirm that all the pods are less than 30 days old. Also, login to Kibana via SSO - SSO is paywalled so it will fail if the license is expired. If the license is expired, follow the below steps to renew it.

      📌 NOTE: only run if trial is expired. after running this you will need to re-configure role mapping

      • R2-D2: ECK Trial Renewal
      Manual Steps Renew ECK Trial 
      kubectl delete hr ek eck-operator -n bigbang
kubectl delete ns eck-operator logging
flux reconcile kustomization environment -n bigbang

# All the following 6 reconciles used to be "suspend and resume", and were changed to forced reconciles to match the [new flux change](https://github.com/fluxcd/flux2/releases/tag/v2.2.0)
flux reconcile hr bigbang -n bigbang --force
flux reconcile hr loki -n bigbang --force
flux reconcile hr promtail -n bigbang --force
flux reconcile hr fluentbit -n bigbang --force    
flux reconcile hr mattermost -n bigbang --force    
flux reconcile hr jaeger -n bigbang --force    

kubectl delete pods -n mattermost --all
kubectl delete po -n jaeger -l app.kubernetes.io/component=all-in-one

      📌 NOTE: Suspend/Resume and pod cycling for Jaeger and Mattermost used to cycle the mounted Elastic certificates. No more. The forced reconciles above should have the same effect.

      📌 NOTE: re-configure role mapping this is the final step to accomplish renewing the ECK trial license.

    • If you are unable to log into ElasticSearch at all, the attached storage might be too full.
      Example error: CLusterBlockException: blocked by: [TOO_MANY_REQUESTS/12/disk usage exceeded flood-stage watermark, index has read-only-allow-delete-block]

      Manual Steps to Delete Indexes 
        # Log into a master node
  kubectl exec -it -n logging logging-ek-es-master-0 -- /bin/bash

  # Find a list of large indices
  curl -k -u elastic:PASSWORD "https://localhost:9200/_cat/indices?v=true&pretty"

  # Delete indices until you free up enough space to gain the ability to log in
  curl -k -X DELETE -u elastic:PASSWORD "https://localhost:9200/logstash-2024.04.23"

  • Review Mattermost Enterprise trial license status:

    📌 NOTE: Mattermost no longer tells you explicitly that the license is expired. It will only show that it is now on the free version when the enterprise trial has expired

    • Login to https://chat.dogfood.bigbang.mil as the root user. The credentials can be found in the dogfood cluster's secret with: kubectl get secret -n bigbang environment-bb-f86gg49kch -o yaml | yq -e '.data."values.yaml"' | base64 -D | yq .addons.mattermost (Note: if the secret does not exist, the name may have changed. Look for the environment-<string> secret in the bigbang namespace) or in the encrypted file by running sops -d bigbang/prod2/environment-bb-secret.enc.yaml | yq e '.stringData."values.yaml"' | yq .addons.mattermost in your dogfood repo.

    • Navigate to the System Console -> Edition and License tab. If the license is expired, follow the steps below to renew it.

      📌 NOTE: only run if trial is expired.

      Renew Mattermost Enterprise Trial

      To "renew" Mattermost Enterprise trial license, connect to RDS postgres DB using psql. Follow the guide (guide will need to be sops decrypted) to connect to the DB. Contact the maintainers 1 if you need additional assistance.

      📌 NOTE: The psql pod may fail to come up.

      Fix the psql pod It may be because credentials have expired. If you check the events on that pod, you may see 4xx error on pulling the images. If you do, you can validate that the credentials are expired by cycling the mattermost deployment. If it fails to come up as well, reach out to the Maintainers [^maintainers] for new credentials. Note you'll need to redo flux after updating the credentials, follow the instructions for updating flux later in this doc, but don't use -s instead provide the new credentials that the Maintainers [^maintainers] provided you.

      Then run the commands below from within the psql connection, which will cycle the license:

      \c mattermost
select * from "public"."licenses";
delete from "public"."licenses";
\q

# At this point you can disconnect from the container with ctrl+c if it doesn't automatically quit
kubectl delete mattermost mattermost -n mattermost
flux reconcile hr mattermost -n bigbang --force

      Validate that the new Mattermost pod rolls out successfully. If it hasn't reconciled you may need to suspend/resume bigbang again. Login as a system admin, navigate to the System Console -> Edition and License tab. Click the "Start trial" button. If a prompt asking you for some trial information appears, just enter a fake email address -- it does not matter.

  • If Flux has been updated in the latest release:

    • Run the Flux install script on your locally cloned Big Bang repo as in the example below

      $ cd bigbang
$ git checkout release-2.<minor>.x
$ git pull
$ ./scripts/install_flux.sh -s
# the `-s` option will reuse the existing secret so you don't have to provide credentials
$ cd ../dogfood-bigbang
# go back to dogfood after flux upgrade

  • Before upgrading the cluster do a sanity check on health of existing cluster resources. Check pods, helmreleases, etc. You want to be aware of and possibly fix any issues before you upgrade the Big Bang deployment.

    • Check Helm Releases all show Ready True.
    kubectl get hr -A
    • Check pods in completed or running state, and all containers running in the pod - ie: Ready 1/1 or 3/3 etc.
    kubectl get pods -A

  • Upgrade the release branch on dogfood cluster master by completing the following.

    • R2-D2: Upgrade Dogfood

      Manual Steps 
      # Create a new branch.
$ git checkout -b <branch_name>
      • Upgrade base kustomization ref=release-2.<minor>.x in bigbang/base2/kustomization.yaml to the release branch.
      • Upgrade prod kustomization branch: "release-2.<minor>.x" in bigbang/prod2/kustomization.yaml to the release branch.
      • Verify the changes above are correct, then:
      # Add & push changes
$ git add bigbang/base2 bigbang/prod2
$ git commit -m "upgrade kustomizations to release-2.<minor>.x"
$ git push -u origin <branch_name>
      • Create a new MR with your kustomization changes pointing to master, and get it approved and merged by the Maintainers 1

      After pushing the changes and opening an MR, have the Maintainers 1 merge your branch into master. Once merged, flux should pick up the changes and begin reconcile the helm releases. This may take up to an hour depending on the size of the release.

    • Verify cluster has updated to the new release

    • Packages have fetched new git repository revisions and match the new release

      $ kubectl get gitrepositories -A

    • Packages have reconciled

    • Watch the Release helmreleases, gitrepositories, and kustomizations to check when all HRs have properly reconciled

      # check release
watch kubectl get gitrepositories,kustomizations,hr,po -A

    📌 NOTE: Manual Steps in the event that Flux does not reconcile for 10 minutes

    If flux has not updated after ten minutes: 
    flux reconcile hr -n bigbang bigbang --with-source --force
    • If flux is still not updating, delete the flux source controller:
    kubectl delete pod -n flux-system -l app=source-controller
    • If the helm release shows max retries exhausted, check a describe of the HR. If it shows "another operation (install/upgrade/rollback) is in progress", this is an issue caused by too many Flux reconciles happening at once and typically the Helm controller crashing. You will need to delete helm release secrets and reconcile in flux as follows. Note that ${HR_NAME} is the same HR you described which is in a bad state (typically a specific package and NOT bigbang itself).
    # example w/ kiali
$ HR_NAME=kiali
$ kubectl get secrets -n bigbang | grep ${HR_NAME}
    # example output:
# some hr names are duplicated w/ a dash in the middle, some are not
sh.helm.release.v1.kiali-kiali.v1                                       helm.sh/release.v1                    1      18h
sh.helm.release.v1.kiali-kiali.v2                                       helm.sh/release.v1                    1      17h
sh.helm.release.v1.kiali-kiali.v3                                       helm.sh/release.v1                    1      17m
    # Delete the latest one:
$ kubectl delete secret -n bigbang sh.helm.release.v1.${HR_NAME}-${HR_NAME}.v3

# suspend/resume the hr
$ flux suspend hr -n bigbang ${HR_NAME}
$ flux resume hr -n bigbang ${HR_NAME}
    • If you see errors about no space left when you kubectl describe a failed deployment. The logs have probably filled the filesystem of the node. Determine which node the deployment was scheduled on and ssh to it and delete the logs. You need to have sshuttle running in order to reach the IP of the nodes.
    ssh -i ~/.ssh/dogfood.pem ec2-user@xx.x.x.xx
sudo -i
rm -rf /var/log/containers/*
rm -rf /var/log/pods/*

    Then the deployment should recover on its own

  • Verify cluster has updated to the new release

    • Run kubectl get pods -A and verify that all Pods are in "Running" or "Completed" status.

3. UI Tests

Default Application Credentials

You may utilize the R2-D2: Run All Tests option which will run all of the tests below it; however before you begin using it you'll need to know your P1 login, as well as a login token for the gitlab.dogfood.bigbang.mil (see gitlab section below for instructions on creating that)

Logging

  • Login to kibana with SSO.

    📌 NOTE: If you get "You do not have permission to access the requested page," follow the instructions under "Renew ECK Trial" in the 2. Upgrade and Debug Cluster section above. Don't forget to log in as admin and reconfigure role mapping after you run the kubectl and flux commands.

  • Verify that Kibana is actively indexing/logging.

    • To do this, click on the drop-down menu on the upper-left corner, then Under "Analytics" click Discover. Click "Create data view." In the "Index pattern" field, enter jaeger*. Set the "Timestamp field" to I don't want to use the time filter, then click "Use without saving". Log data should populate.
    • If it is not indexing (you see no index for jaeger), you may have renewed the ElasticSearch license and jaeger did not reconcile after the renewal. Force jaeger to pick up the new configuration by doing: flux reconcile hr -n bigbang jaeger --force --with-source

Kiali

  • Login to kiali with SSO
  • Validate graphs and traces are visible under applications/workloads
  • Validate no errors appear

    ℹ️ NOTE Red notification bell would be visible if there are errors. Errors on individual application listings for labels, etc are expected and OK.

Twistlock

  • Log in here

    • In the Targets drop down choose serviceMonitor/twistlock/twistlock-console/0
    • Click the small "show more" button that appears. You should see a State of UP and no errors.

  • R2-D2: Twistlock Test

    Manual Steps

    • Login to twistlock/prisma cloud with the credentials in the secret:

      kubectl get secret -n twistlock twistlock-console -o go-template='{{.data.TWISTLOCK_USERNAME | base64decode}}' ; echo ' <- username'
kubectl get secret -n twistlock twistlock-console -o go-template='{{.data.TWISTLOCK_PASSWORD | base64decode}}' ; echo ' <- password'

    • Under Manage -> Defenders, make sure the number of defenders online is equal to the number of nodes on the cluster. You can list cluster nodes with kubectl get nodes -A Defenders will scale with the number of nodes in the cluster. If there is a defender that is offline, check whether the node exists in cluster anymore. Cluster autoscaler will often scale up/down nodes which can result in defenders spinning up and getting torn down. As long as the number of defenders online is equal to the number of nodes everything is working as expected. 📌 NOTE: Pods cannot be allocated to the control-plane nodes, so Twistlock may only show a number of defenders equal to the number of nodes minus the number of control plane nodes

Fortify

  • R2-D2: Fortify Test

    Fortify Manual Steps
    • Login to fortify as the default admin (find credentials with sops -d bigbang/prod2/environment-bb-secret.enc.yaml | sed 's/\\n/\'$\'\n/g' | grep "Fortify admin")
    • Validate that the Dashboard page has sections titled Issues Remediated and Issues Pending Review

GitLab Sonarqube Gitlab Runner

📌 NOTE: if gitlab has updated to v18 and pipelines are not running, need to follow this procedure to create new runners Runner Registration, right now we have this new process turned off but v18 gets rid of that bypass capability.

  • Login to gitlab with SSO

  • Edit profile and change user avatar. If your avatar doesn't change right away, check again later. It can take several minutes or more.

  • Go to Security > Access Token and create a personal access token. Select all scopes. Record the token. You'll need it for the next two steps.

  • R2-D2: Gitlab Test

    Gitlab Manual Steps

    • Create new public group with release name. ie. release-2-<minor>-x

    • Create new public project (under the group you just made), also with release name (e.g.release-2.7.x if you're working on release 2.7.0).

    • git clone project

    • Pick one of the project folders from Sonarqube Samples and copy all the files into your clone from dogfood

      • Git commit and push your changes to the repo. When prompted enter your username and the access token as your password.

    • Test a docker image push/pull to/from registry

      docker pull alpine
docker tag alpine registry.dogfood.bigbang.mil/<GROUPNAMEHERE>/<PROJECTNAMEHERE>/alpine:latest
docker login registry.dogfood.bigbang.mil # Enter your gitlab username and personal access token
docker push registry.dogfood.bigbang.mil/<GROUPNAMEHERE>/<PROJECTNAMEHERE>/alpine:latest
docker image rm registry.dogfood.bigbang.mil/<GROUPNAMEHERE>/<PROJECTNAMEHERE>/alpine:latest
docker pull registry.dogfood.bigbang.mil/<GROUPNAMEHERE>/<PROJECTNAMEHERE>/alpine:latest
    Sonarqube Manual Steps

    • Login to sonarqube with SSO

    • Add a project for your release. When prompted for how you want to analyze your repository, choose "Locally."

    • Generate a token for the project and copy the token somewhere safe for use later

    • When prompted to "Run analysis on your project" choose "Other (for JS, TS, Go, Python, PHP...)". For "What is your OS?" choose Linux. Copy everything that appears under "Running a SonarQube analysis is straightforward. You just need to execute the following commands in your project's folder" and save it somewhere secure for use later.

    • After completing the gitlab runner test return to sonar and check that your project now has analysis

      ℹ️ NOTE The project token and project key are different values.

    Gitlab Runner Manual Steps

    • Log back into gitlab and navigate to your project

    • Under settings, CI/CD, variables add two vars:

      • SONAR_HOST_URL set equal to https://sonarqube.dogfood.bigbang.mil/
      • SONAR_TOKEN set equal to the token you copied from Sonarqube earlier (make this masked)

    • Under settings, CI/CD, deselect "Default to Auto DevOps pipeline" and click Save changes.

    • Add a .gitlab-ci.yml file to the root of the project, paste in the contents of sample_ci.yaml, replacing -Dsonar.projectKey=XXXXXXX with what you copied earlier

    • Commit, validate the pipeline runs and succeeds (may need to retry if there is a connection error), then return to the last step of the sonar test

Sonarqube

📌 NOTE: If the Sonarqube is getting a major version update, you will need to go to 'http://sonarqube.dogfood.bigbang.mil/setup' to upgrade before you will be able to login.

  • Login to sonarqube with SSO
  • Verify your Project says PASSED

Nexus

  • R2-D2: Nexus Test

    Nexus Manual Steps

    • Login to Nexus as admin, password is in the nexus-repository-manager-secret secret:

      # username is admin, password is the output of this command
kubectl get secret -n nexus-repository-manager nexus-repository-manager-secret -o go-template='{{index .data "admin.password" | base64decode}}' ; echo

    • Validate there are no errors displaying in the UI (an "Available CPUs" error about the host system "allocating a maximum of 1 cores to the application" is acceptable).

    • Push/pull an image to/from the nexus registry

      • With the credentials from the encrypted values (or the admin user credentials) login to the nexus registry

        docker login containers.dogfood.bigbang.mil

      • Tag and push an image to the registry:

        # ex: <release> = `2-12-0`
$ docker tag alpine:latest containers.dogfood.bigbang.mil/alpine:<release>
$ docker push containers.dogfood.bigbang.mil/alpine:<release>

      • Pull down the image for the previous release

        # ex: <last-release> = `2-12-0`
$ docker pull containers.dogfood.bigbang.mil/alpine:<last-release>

Minio

  • R2-D2: Minio Test

    Minio Manual Steps - [ ] Log into the Minio UI - access and secret key are in the `minio-root-creds-secret` secret 
    # ex: <last-release> = `2-12-0`
$ docker pull containers.dogfood.bigbang.mil/alpine:<last-release>
    • Create bucket
    • Store file to bucket. To do this after creating the bucket, click on Object Browser, then click the bucket, then Upload.
    • Download file from bucket
    • Delete bucket and files

Mattermost

  • R2-D2: Mattermost Test

    Mattermost Manual Steps
    • Login to mattermost with SSO.
    • Update/modify profile picture
    • Log out and log back in as admin. You can login as the robot admin if you do not have this access (find credentials in encrypted values or with sops -d bigbang/prod2/environment-bb-secret.enc.yaml | sed 's/\\n/\'$\'\n/g' | grep "Robot admin")
    • Send chats and validate that chats from previous releases are visible.
    • Under System Console -> Environment, click Elasticsearch and then click Test Connection and Index Now. Validate that both are successful. If Elasticsearch does not appear as an option, go to About > Edition and License on the System Console menu and click the Start Trial button.

      📌 NOTE: Mattermost may display a warning that the ElasticSearch version is too high, but the test connection should complete successfully regardless

ArgoCD

  • R2-D2: ArgoCD Test

    ArgoCD Manual Steps

    • Login to argocd with SSO

    • Logout and login with username admin. The password is in the argocd-initial-admin-secret secret. If that doesn't work attempt a password reset:

      kubectl -n argocd get secret argocd-initial-admin-secret -o json |  jq '.data|to_entries|map({key, value:.value|@base64d})|from_entries'

    • Create application

    • Delete app

Kyverno

  • R2-D2: Kyverno Test

    Kyverno Manual Steps

    📌 NOTE: if using MacOS make sure that you have gnu sed installed and add it to your PATH variable GNU SED Instructions

    • Test secret sync in new namespace 
      # create secret in kyverno NS
kubectl create secret generic \
-n kyverno kyverno-bbtest-secret \
--from-literal=username='username' \
--from-literal=password='password'

# Create Kyverno Policy
kubectl apply -f https://repo1.dso.mil/big-bang/product/packages/kyverno/-/raw/main/chart/tests/manifests/sync-secrets.yaml

# Wait until the policy shows as ready before proceeding
kubectl get clusterpolicy sync-secrets

# Create a namespace with the correct label (essentially we are dry-running a namespace creation to get the yaml, adding the label, then applying)
kubectl create namespace kyverno-bbtest --dry-run=client -o yaml | sed '/^metadata:/a\ \ labels: {"kubernetes.io/metadata.name": "kyverno-bbtest"}' | kubectl apply -f -

# Check for the secret that should be synced - if it exists this test is successful
kubectl get secrets kyverno-bbtest-secret -n kyverno-bbtest
    • Delete the test resources 
      # If above is successful, delete test resources
kubectl delete -f https://repo1.dso.mil/big-bang/product/packages/kyverno/-/raw/main/chart/tests/manifests/sync-secrets.yaml
kubectl delete secret kyverno-bbtest-secret -n kyverno
kubectl delete ns kyverno-bbtest

Velero

  • R2-D2: Velero Test 📌 NOTE: This test fails occasionally. You may need to run it multiple times to get it to pass.

    Velero Manual Steps

    • Login to https://nexus.dogfood.bigbang.mil/#browse/welcome as admin. Confirm the following to allow the test deployment to pull the alpine image from Nexus without credentials

    • Verify that the velero-tests.dogfood.bigbang.mil/alpine:test repository exists on Nexus

    • Verify anonymous docker pull is enabled for velero-tests repository: Settings -> Repositories -> velero-tests -> Check Allow anonymous docker pull (Docker Bearer Token Realm required) -> Save

    • Go to Settings -> Security -> Realms and verify that Docker Bearer Token is in the Active column. If not, click on it to move it there, then click Save

    • Verify Anonymous Access is enabled. Settings -> Security -> Anonymous Access -> Check Allow anonymous users to access the server -> Save

    • Install the velero CLI on your workstation if you don't already have it (for MacOS, run brew install velero).

    • Then set VERSION to the release you are testing:

      $ VERSION=2-<minor>-0

    • Backup PVCs using velero_test.yaml.

      $ kubectl apply -f ./docs/release/velero_test.yaml
# wait 30s for velero to be ready then:
# exec into velero_test container, check log
$ veleropod=$(kubectl get pod -n velero-test -o json | jq -r '.items[].metadata.name')
$ kubectl exec $veleropod -n velero-test -- tail /mnt/velero-test/test.log

    • Then set VERSION to the release you are testing and use the CLI to create a test backup:

      $ VERSION=2-<minor>-0
$ velero backup create velero-test-backup-${VERSION} -l app=velero-test
$ velero backup get

    • Wait a bit, re-run velero backup get, when it shows "Completed" delete the app.

      $ kubectl delete -f ./docs/release/velero_test.yaml
# namespace "velero-test" deleted
# persistentvolumeclaim "velero-test" deleted
# deployment.apps "velero-test" deleted

    • Restore the test resources from the backup

      $ velero restore create velero-test-restore-${VERSION} --from-backup velero-test-backup-${VERSION}
# exec into velero_test container
$ kubectl exec $veleropod -n velero-test -- cat /mnt/velero-test/test.log

    • Confirm both old and new log entries appear in logs, this confirms backup was done correctly

    • Example output of container logs:

      Running command: kubectl exec velero-test-6549b5768d-872jc -n velero-test -- tail /mnt/velero-test/test.log
Command output:
Fri Jul 21 13:47:00 UTC 2023
Fri Jul 21 13:47:10 UTC 2023
      Running command: kubectl exec velero-test-6549b5768d-872jc -n velero-test -- cat /mnt/velero-test/test.log
Command output:
Fri Jul 21 13:47:00 UTC 2023
Fri Jul 21 13:47:10 UTC 2023
Fri Jul 21 13:47:20 UTC 2023
Fri Jul 21 13:47:30 UTC 2023
Fri Jul 21 13:50:45 UTC 2023
Fri Jul 21 13:50:55 UTC 2023

    • Cleanup test and delete resources

      $ kubectl delete -f ./docs/release/velero_test.yaml
# namespace "velero-test" deleted
# persistentvolumeclaim "velero-test" deleted
# deployment.apps "velero-test" deleted

Loki

  • R2-D2: Loki Test

    Loki Manual Steps

    • Click on the drop-down in the upper-left corner again and choose Data Sources, then choose Loki. Scroll down and click Save & Test. A message should appear that reads "Data source successfully connected."

  • Login to grafana as admin. User name "admin". Retrieve password with sops -d bigbang/prod2/environment-bb-secret.enc.yaml | sed 's/\\n/\'$\'\n/g' | grep grafana -A 2

  • Click on the drop-down on upper-left, choose Dashboards, then Loki Dashboard quick search. Verify that this dashboard shows data/logs from the past few minutes and hours.

  • Click on the drop-down on upper-left, choose Dashboards, then Loki / Operational. Verify that both the Distributor Success Rate and Ingester Success rate are 100%, and that when you expand the Chunks item (toward the bottom of the page), data exists.

Tempo

  • R2-D2: Tempo Test

    Tempo Manual Steps
    • Login to grafana as admin. User name "admin". Retrieve password with sops -d bigbang/prod2/environment-bb-secret.enc.yaml | sed 's/\\n/\'$\'\n/g' | grep grafana -A 2
    • Click on the drop-down menu on the upper-left corner, then choose Data Sources, then Tempo. Scroll down and click Save & Test. A message should appear that reads "Data source successfully connected."
    • Visit tempo tracing & ensure Services are populating under Service drop down. For example, you might see jaeger-query and tempo-grpc-plugin listed as options. 📌 NOTE: this test is obsolete at the moment as we do not have any data tethered to tempo at the moment

Keycloak

  • R2-D2: Keycloak Test

    Keycloak Manual Steps
    • Login to Keycloak admin console. The credentials are in the keycloak-env secret: 
      kubectl get secret keycloak-env -n keycloak -o jsonpath="{.data.KEYCLOAK_ADMIN}" | base64 -d ; echo " <- admin user"
kubectl get secret keycloak-env -n keycloak -o jsonpath="{.data.KEYCLOAK_ADMIN_PASSWORD}" | base64 -d ; echo " <- password"

Neuvector

  • R2-D2: Neuvector Test

    Neuvector Manual Steps
    • Login to Neuvector with the default login (currently admin:admin, update this to something secure)
    • If admin password is unknown reset it to default
    • Navigate to Assets -> System Components and validate that all components are showing as healthy
    • Under Assets -> Containers, click on any image and run a scan. When the scan finishes, click on the container. You'll see the results in the Compliance and Vulnerabilities tabs below.
    • Under Network Activity, validate that the graph loads and shows pods and traffic. This graph can take several minute or more to load. You may want to leave the tab up and move on to the next UI test while it populates.

Grafana & ArgoCD & Anchore & Mattermost SSO

  • R2-D2: Native SSO Grafana, ArgoCD, Anchore and Mattermost Test 📌 NOTE: Grafana OPA Violations dashboard showing "No Data" is a known issue. This has been skipped since 2.18.0, current open issue awaiting fix is here.

    SSO Manual Steps

Monitoring & Cluster Auditor & Tracing (Jaeger) & Alertmanager

  • R2-D2: authservice SSO Prometheus, Tracing, AlertManager, and Cluster Auditor Test

    SSO2 Manual Steps

    • Load alertmanager, login with SSO, and validate that the watchdog alert at minimum is firing

    • Load tracing, login with SSO, and ensure there are no errors on main page and that traces can be found for apps

      📌 NOTE: Grafana OPA Violations dashboard showing "No Data" is a known issue. This has been skipped since 2.18.0, current open issue awaiting fix is here.

    • Login to grafana with SSO

    • OPA Violations dashboard is present and shows violations in namespaces

    • Click on the drop-down menu in the upper-left and choose Dashboards. Verify that several Kubernetes and Istio dashboards are listed. Click on a few of these and verify that metrics are populating in them.

    • Login to prometheus

    • Go to Status > Targets. Validate that no unexpected services are marked as Unhealthy

      KNOWN UNHEALTHY INCLUDE:
serviceMonitor/monitoring/monitoring-monitoring-kube-kube-controller-manager/0
serviceMonitor/monitoring/monitoring-monitoring-kube-kube-etcd/0
serviceMonitor/monitoring/monitoring-monitoring-kube-kube-scheduler/0

Anchore

  • log back in as the admin user - password is in anchore-anchore-enterprise secret (admin will have pull credentials set up for the registries):

    kubectl get secret anchore-anchore-enterprise -n anchore -o json | jq -r '.data.ANCHORE_ADMIN_PASSWORD' | base64 -d; echo ' <- password'

  • Scan image in dogfood registry, registry.dogfood.bigbang.mil/GROUPNAMEHERE/PROJECTNAMEHERE/alpine:latest

    • Go to Images Page, Analyze Tag
      • Registry: registry.dogfood.bigbang.mil
      • Repository: GROUPNAME/PROJECTNAME/alpine
      • Tag: latest

  • Scan image in nexus registry, containers.dogfood.bigbang.mil/alpine:<release-number> (use your release number, ex: 1-XX-0). If authentication fails that means that the Nexus credentials have changed. Retrieve the Nexus credentials using instructions from Nexus above. Update creds in Anchore by clicking on menu Images > Analyze Repository > link at bottom "clicking here" > click on registry name > then edit the credentials.

  • Validate scans complete and Anchore displays data (click the SHA value for each image)

4. Create Release

🛑 STOP: Before finalizing the release, confirm that the latest bb-docs-compiler pipeline passed. If not, identify, correct, and cherry-pick a fix into the release branch. This will prevent wasting time re-running pipelines if the docs compiler pipeline fails.

  • In dogfood repo, create a MR with the release notes created in the step below, and ask the Maintainers 1 to merge before proceeding.

  • Build the release notes:

    • R2-D2: run with the Build release notes option selected
    • Commit the resulting release notes and push to <release-branch> in Big Bang (dogfood)
    Manual Steps 
      # clone the dogfood cluster repo
  $ git clone https://repo1.dso.mil/big-bang/team/deployments/bigbang/ dogfood-bigbang
  # cd into the dogfood-bigbang repo's release notes dir
  $ cd dogfood-bigbang/docs/release
  # Select the `Build release notes` option
  $ r2d2
  # commit the release notes
  $ cd ../../
  $ git add .
  $ git commit -m "add initial release notes"
  $ git push -u origin <branch_name>

  • clean up release notes

    • Check to see if any packages have been added or graduated from BETA. There is no single resource that lists this information, but you should generally be aware of packages that have been added or moved out of BETA from discussions with other team members during your workdays. You can also ask the Maintainers 1 if unsure. If any packages have been added or moved out of BETA, adjust your local R2D2 config as needed. Also open an MR for R2D2 with the change to the default config.
    • Create Upgrade Notices, based off of the listed notices in the release issue. Also review with maintainers to see if any other major changes should be noted.
    • Move MRs from 'Big Bang MRs' into their specific sections below. If MR is for Big Bang (docs, CI, etc) and not a specific package, they can remain in place under 'Big Bang MRs'. General rule of thumb: if the git tag changes for a package - put the MR under that package; and if there is no git tag change for a package - put it under BB.
    • Adjust known issues as needed: If an issue has been resolved it can be removed and if any new issues were discovered they should be added.
    • Verify table contains all chart upgrades mentioned in the MR list below.
    • Verify table contains all application versions. Compare with previous release notes. If a package was upgraded there will usually be a bump in application version and chart version in the table.
    • Verify all internal comments are removed from Release Notes, such as comments directing the release engineer to copy/move things around
    • Any issues encountered during release upgrade testing need to be thoroughly documented in the release notes. If you had to delete a replica set, force restart some pods, delete a PV, please make sure these steps are included in our known issues section of the release notes.

  • Finalize the tag in chart/Chart.yaml (remove -rc.x if present), commit and push this change

  • If there were any cherry-picks during Step 3, in dogfood repo: re-run R2D2 job Build release notes

  • Re-run helm docs to update to the latest version + latest package versions.

    cd bigbang
git pull
# pull any last minute cherry picks, verify nothing has greatly changed
git checkout release-2.<minor>.x
docker run -v "$(pwd):/helm-docs" -u $(id -u) jnorwood/helm-docs:v1.5.0 -s file -t .gitlab/base_config.md.gotmpl --dry-run > ./docs/understanding-bigbang/configuration/base-config.md
# commit and push the changes (if any)

  • Create release candidate tag based on release branch, ie. 2.<minor>.0-rc.0. Tagging will additionally create release artifacts and the pipeline runs north of 1 hour. You will need to request tag permissions from the Maintainers 1.

    • To do this via the UI (generally preferred): tags page -> new tag, name: 2.<minor>.0-rc.0, create from: release-2.<minor>.x, message: "release candidate", release notes: leave empty

    • To do this via git CLI:

      git tag -a 2.<minor>.0-rc.0 -m "release candidate"
# list the tags to make sure you made the correct one
git tag -n
git push origin 2.<minor>.0-rc.0

  • Passed pipeline for Release Candidate tag.

  • Passed pipeline in bb-docs-compiler for latest RC tag (Gets created/scheduled towards the end of the bigbang release pipeline).

    Review all pipeline output looking for failures or warnings. Reach out to the maintainers for a quick review before proceeding. Maintainers 1

  • Check the releases for release notes.

    📌 NOTE: There is currently an error with automatically adding the release-notes to the release and you will have to add them manually

  • Create release tag based on release branch. ie. 2.<minor>.0.

    • To do this via the UI (generally preferred): tags page -> new tag, name: 2.<minor>.0, create from: release-2.<minor>.x, message: release 2.<minor>.0, release notes: leave empty

    • To do this via git CLI:

      git tag -a 2.<minor>.0 -m "release 2.<minor>.0"
# list the tags to make sure you made the correct one
git tag -n
# push
git push origin 2.<minor>.0

  • Passed release pipeline.

    Review all pipeline output looking for failures or warnings. Reach out to the maintainers for a quick review before proceeding. Maintainers 1

    • Ensure that the RC tag release created prior to this was deleted as well.

  • Ensure Release Notes are present here

📌 NOTE: There is currently an error with automatically adding the release-notes to the release and you will have to add them manually

  • Ensure that release docs have compiled and appear on Big Bang Docs.
    • Expand the drop down in the title bar showing latest and confirm the current release is present.
    • Click around in the docs and make sure docs are properly formatted, pay special attention to lists and tables.

    📌 NOTE: BB-docs wont actually publish the latest release version until the nightly bb-docs job runs. you can check this on the following day.

  • Type up a release announcement for the Maintainers 1 to post in the Big Bang Value Stream channel. Mention any breaking changes and some of the key updates from this release. (add @andrew_vu's survey that we asked for in the release note cleanup to the announcement as well) Use same format as a prior announcement https://chat.il2.dso.mil/platform-one/channels/team---big-bang
  • Cherry-pick release commit(s) as needed with merge request back to master branch. We do not ever merge release branch back to master. Instead, make a separate branch from master and cherry-pick the release commit(s) into it. Use the resulting MR to close the release issue. 
    # Navigate to your local clone of the BB repo
cd path/to/my/clone/of/bigbang
# Get the most up to date master
git checkout master
git pull
# Check out new branch for cherrypicking
git checkout -b 2.<minor>-cherrypick

# Repeat the following for whichever commits are required from release
# Typically this is the initial release commit (bumped GitRepo, Chart.yaml, CHANGELOG, README) and a final commit that re-ran helm-docs (if needed)
git cherry-pick <commit sha for Nth commit>

git push -u origin 2.<minor>-cherrypick
# Create an MR using Gitlab, merging this branch back to master, reach out to maintainers to review
  • Close Big Bang Milestone in GitLab. (make sure that there are n+2 milestones still, the current one and 1 future milestone, if not contact the maintainers 1)
  • Handoff the release to the Maintainers 1, they will review then celebrate and announce the release in the public MM channel
  • Reach out to @marknelson to let him know that the release is done and to update the Gitlab Banner

  1. @jfoster @chris.oconnell @michaelmartin @andrewshoell ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10 ↩11 ↩12 ↩13 ↩14 ↩15 ↩16 ↩17 ↩18

Edited by Joe Foster

UNCLASSIFIED - NO CUI